The system I have on my Citreon C1 was fitted by TowBars2TowCars of Grimsby and they offer a bi-annual check on their systems ,and after speaking to them today like mine they have not had any failures of any kind . I just feel that bit safer having it checked at regular intervals .
Sorry thats my spelling for you it should have said biennial which is of course every 2 years
Last edited by grandadbaza; 13-07-2015 at 19:43.
The basic problem with A frames is that they have to attach to the front of the car in a strong way.
The fronts of cars are designed to be not strong so they will crumple in an accident, protecting the occupants and any pedestrians.
So if the A Frame is attached without reinforcement, it may risk the front of the car coming apart.
If the A Frame is attached with reinforcement, you have reduced the protection offered by the crumple zone - and that's most significant on a small car: they're the ones with least crumple zone in the first place!
Either way, it certainly is something you should tell your insurers about, because it substantially alters the risk.
As you may gather, I don't think A Frame towing is a good idea, except in cases of breakdowns. Almost all recovery firms use spectacle lifts or spectacle trailers, not A frames, if they don't carry the vehicle on a flat bed.
I think they're called "dolly" - this is the sort of thing I mean: Towing Dolly trailer /car Recovery every thing there heavy duty all ready to use | eBay
Last edited by hairydog; 13-08-2016 at 13:06.
the situation is probably not helped by the amounts of shock loading applied under even normal towing conditions...
manufacturers spend many hours and heaps, of money designing and then testing to destruction their vehicles structures... however I'm pretty certain after market A frames don't even cross their minds.
I've never liked the idea of a frames other than for emergency useage.
Wonder what the manufacturers would say if they told them what they were doing. How can you asses what is going on in a monocoque construction if all you do is look for what you think is a strong bit and weld / bolt chunks of metal to it. I found a YouTube video of one being fitted. One side was ( Ok ) because they were using the towing eye but they had to construct another towing eye support for the other side. Lot of strain on this part of the vehicle and forcing the vehicle to turn by pulling it must also put a tremendous strain on all the front body panels. With more and more MH's being purchased more and more are going to want to tow a vehicle. They will all be looking for the cheapest solution as they have just blown all their cash on the main part.
Someone on the Caravan and Motorhome Club Forum wanted to know the etiquettes for arriving on site towing a car
Hate to think how much type approval would cost. Can you imaging fastening a car to the back of a MH and driving it into a concrete block at 50 mph to see what happens. That would certainly test the A Frame. If it failed you would be in a really bad place.
Last edited by QFour; 23-02-2017 at 17:26.
There are currently 1 users browsing this thread. (0 members and 1 guests)